GRC components are generally used in the construction industry. With the change of the times, the number of GRC components will continue to increase, and the scope of application will continue to expand. The advantages of these GRC components are as follows: first, long service life; second, many types of GRC components can be made, and the models are different. In the production process, according to the requirements of different customers, These GRC components in the production of the need to pay attention to the details!

在我們進行裝飾和裝修的過程中，我們要不斷的對grc構件的使用進行注意，這種grc材料是促進保護的一種材料，并且grc廠家可以為我們提供各種各樣的浮雕等裝飾物，這對我們的生產有很大的幫助，grc構件是一種裝飾材料更加是材料，在進行安裝的時候，我們對接縫處應該怎么處理呢?

In the process of decoration, we should pay more attention to the use of GRC components. This kind of GRC material is a kind of material to promote safety protection, and GRC manufacturers can provide us with a variety of relief and other decorations, which is of great help to our production. GRC components are a kind of decorative material, but also a kind of safety material. When we install them, What should we do with the seams?
                

1、我們在安裝grc構件的時候，需要用網格布進行翻包，在特殊情況下，我們需要用粘結的砂漿進行粘合，這種粘合顯得更加的自然，在一些生活中，我們的很多的線條的使用要求也是很高的，可以促進了我們的粘接效果的增強。注意線條周邊溢出的粘結砂漿并保持線條表面清潔，粘結縫之間無碰頭灰，灰縫隨粘隨勾。

1. First of all, when we install GRC components, we need to use mesh cloth to turn the package. In special cases, we need to use bonded mortar for bonding. This kind of bonding is more natural. In some lives, many of our lines have high requirements, which can promote the enhancement of our bonding effect. Pay attention to remove the adhesive mortar spilled around the line and keep the line surface clean. There is no cement between the adhesive joints, and the mortar joints are glued with the hook.

2、安裝時若需拼接，應事先測量好拼接尺寸和角度，并在平整地方進行預拼裝，縫隙不大于2mm。縫隙的浮灰、油污必須處理干凈，縫隙粘結處必須要用刷子沾清水濕潤，以保證粘結牢固。

2. If splicing is required during installation, the splicing size and angle shall be measured in advance, and the pre assembly shall be carried out at a flat place with the gap no more than 2mm. The floating dust and oil in the gap must be cleaned, and the bonding place of the gap must be moistened with clean water with a brush to ensure firm bonding.

3、將粘結砂漿填滿用刮刀將擠出的縫隙膠刮到凹不要凸。

3. Fill the adhesive mortar and scrape the extruded gap glue to the concave without protruding.

4、將80~100mm網格布放到線條接縫中間，表面刮抗裂砂漿注意壓實，將氣泡趕出，防裂帶應展開，不允許有打折現象。

4. Put 80 ~ 100 mm mesh cloth in the middle of line joint, scrape anti crack mortar on the surface, pay attention to compaction, drive out bubbles, and unfold anti crack belt, without discount.

感謝您的閱讀，希望以上內容對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：山東GRC構件http://m.libpo.com.cn。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: Shandong GRC component http://m.libpo.com.cn .