浮雕材質的不同，其制造工藝流程也存在不同，普通浮雕運用石材、玻璃鋼、鍛銅這三種材質，在這里我們也就分這三品種型浮雕來分別引見其制造工藝流程：
The manufacturing process of relief is also different with different materials. Ordinary relief uses three materials: stone, FRP and forged copper. Here, we will introduce the manufacturing process of these three types of relief:
一、石材浮雕制造工藝流程
1、 Manufacturing process flow of stone relief
石材是浮雕運用較多的材質，在制造石材浮雕之前，需選擇與圖稿及設計請求匹配的石材，并檢查色差，然后把毛材制造成板材，將其鋸解成尺寸料，并停止合縫檢查，接著就是按圖稿1：1制成大稿。在雕琢大圖放制后，接著就是停止石材大形雕琢，再然后由技師精摹細琢。接下來等磨光雕琢全部竣工后，就停止細部處置，并用粗砂布、細砂布停止磨光。然后就是廢品驗收，等驗收完后就要肯定裝置尺寸，做好鋼材骨架，后就是浮雕整體的裝置，然后在由技師停止部分處置，并停止裝置驗收。
Stone is a material used more in relief. Before manufacturing stone relief, it is necessary to select the stone matching the drawings and design requirements, check the color difference, then manufacture the wool into plates, sawn it into size materials, stop joint inspection, and then make a large draft according to 1:1 of the drawings. After the large-scale carving drawing is made, then the large-scale carving of stone is stopped, and then the technician will carefully copy and carve it. Next, after the polishing and carving are completed, stop the detailed disposal, and stop the polishing with coarse emery cloth and fine emery cloth. Then there is the acceptance of waste products. After the acceptance, it is necessary to confirm the size of the device, do a good job in the steel skeleton, and finally emboss the overall device, and then stop the partial disposal by professional technicians and stop the device acceptance.
二、鍛銅浮雕制造工藝流程
2、 Manufacturing process flow of forged copper relief
鍛銅浮雕在古代運用較多。而制造鍛銅浮雕，同樣要先停止1：1的泥稿制造，然后在泥稿的根底上翻制玻璃鋼鍛模，做完這一步后接下來就是在玻璃鋼鍛模根底上停止人工錘鍛，制造成鍛銅浮雕廢品，接著就是對鍛銅浮雕外表停止打磨處置，并依據圖稿作部分著色處置，然后就只剩裝置了。
Wrought copper relief was widely used in ancient times. For the manufacture of forged copper relief, it is also necessary to first stop the production of 1:1 clay manuscript, and then turn over the FRP forging die on the basis of the clay manuscript. After this step, the next step is to stop manual hammer forging on the basis of the FRP forging die to produce forged copper relief waste products, and then stop polishing the surface of forged copper relief, and make partial coloring according to the drawings, Then there's only the device left.
三、玻璃鋼浮雕制造工藝流程
3、 Manufacturing process flow of FRP relief
玻璃鋼材質是近年來開展盛行的雕塑資料，因而現代浮雕運用玻璃鋼較多。在制造玻璃鋼浮雕之前，要先停止1：1的泥稿制造，然后就是在泥稿的根底上翻制石膏模，并停止精密打磨，再者就是在石膏模的根底上翻制玻璃鋼浮雕廢品，在翻制玻璃鋼浮雕廢品后就要對玻璃鋼浮雕外表停止打磨，并依據圖稿作部分著色處置，在停止完打磨，著色后就是裝置了。
FRP is a popular sculpture material in recent years, so FRP is widely used in modern relief. Before making FRP relief, stop making 1:1 clay manuscript, then turn over the gypsum mold on the base of the clay manuscript and stop precision grinding. In addition, turn over the FRP relief waste on the base of the gypsum mold. After turning over the FRP relief waste, stop grinding the surface of the FRP relief, and make partial coloring treatment according to the drawings. After stopping grinding, After coloring, it is the device.
The above information is the knowledge sharing provided by Shandong relief sculpture manufacturer to Xiaobian. For more wonderful contents, please click our website: http://m.libpo.com.cn We will have more content for you to check later
